Display; Assistance Indicator - Derby cycle Impulse 2.0 Ergo Originalbetriebsanleitung

7.2

Display

1 2
1 Speed
2 Power-assist mode
3 Battery charge state
4 Remaining range
5 Information area
The display in the middle of the handlebar is divided into
ive diferent display ields.
•
At the top on the let is your current
•
To the right of the current speed is a display show-
ing the selected 2
7.2.1.
•
At the top on the right is the
which tells you the current battery charge state of
Chapter 7.2.2.
your Pedelec
•
Below this the remaining
Chapter 7.2.3.
•
Along the bottom section of the display is a long
information area that can be used to call up
5
the following information:
You can switch between the various displays in the
information area by pressing the
main menu.
•
How much of its potential output the motor is
currently delivering.
•
The costs incurred in the course of the current
trip and during the entire service life.
•
The savings achieved in both euros and CO2 in
comparison with the same journey by car.
•
Total number of kilometres covered.
•
Kilometres covered during the day and overall.
3
4
5
1 speed.
Chapter
power-assist mode
3 battery symbol
range is displayed
4
button in the
•
Journey time during the current trip and the top
speed reached on this trip.
•
Average speed during the current trip and the
total distance covered.

7.2.1 Assistance indicator

The display shows you how much assistance the motor is
currently providing.
DISPLAY ASSISTANCE
The level of assistance depends
ERGO
POWER
on your heart rate.
SPORT
ECO
This means the assistance is
ERGO
POWER
working hard.
SPORT
ECO
This means the assistance is
ERGO
POWER
working at medium output.
SPORT
ECO
This means the assistance is
ERGO
POWER
working at low output.
SPORT
ECO
No assistance. Battery indicator
ERGO
POWER
is still lit.
SPORT
ECO
Use the / buttons to switch between the individual
power-assist modes.
Original User Manual | Pedelec Impulse 2.0 Ergo 21