Derby cycle Impulse 2.0 Ergo Originalbetriebsanleitung Seite 38

Introduction
Thank you for choosing the Impulse Ergo Pedelec rom
our company. This bike is equipped with an innovative
electric drive that assists you when you are cycling. This
will make your trip much more enjoyable if you are riding
up hills, carrying loads or riding into the wind. You can
decide yourself how much you want to use it. This bike
has all of the unctions of the Impulse Pedelec 2.0, but has
one special feature: The Ergo System.
With this bike, your heart rate controls the drive when
you use the ERGO mode. If your heart rate falls below
the preset value, the assistance provided by the drive is
automatically reduced. If your heart rate rises above the
set value, the assistance provided by the drive increases.
This enables an optimal heart rate range to be maintained
whilst riding, thus avoiding dangerous peaks in the heart
rate and training your endurance.
This system is complemented by NuVinci Harmony gears.
If your speed reduces or increases, the gears automati-
cally adjust the gear ratio in automatic mode. This means
that you always pedal with the same pedalling cadence
irrespective of the speed.
The pedalling cadence describes how many times the
pedal crank of your Pedelec revolves in one minute.
Experts simply call it cadence.
The purpose of this User Manual is to help you get the
most out of your Pedelec Impulse 2.0 Ergo and use it cor-
rectly.
Structure of the User Manual
If you want to get started right away, refer to the brief
Chapter 4 "Quick start".
introduction in
The most important components of your Pedelec are de-
scribed in detail in the following chapters.
You will ind the technical data for your Pedelec Impulse
2.0 Ergo in Chapter 12 "Technical data".
The information in this User Manual speciically refers to
your Pedelec Impulse 2.0 Ergo. For general information,
on the bike technology, for example, refer to the General
User Manual (CD).
CD with important information
On the enclosed CD, you will ind versions of the User
Manual for the Pedelec Impulse 2.0 Ergo in various lan-
guages. In addition, the CD also contains the General User
Manual with general information on the bike technology.
You can download the latest version of the User Manual
rom the Internet. There you will also ind manuals for the
individual bike components.
You can run the CD using any commercially available PC or
laptop. Proceed as follows:
METHOD A:
1. Insert the CD.
2. Double-click on the ile shelexec.exe using the let
mouse button.
3. Select the desired language.
4. Select "Open User Manual rom CD" or "Check for new
version of User Manual online".
METHOD B:
1. Insert the CD.
2. Using the mouse, right-click once on: "Open folder to
display iles."
3. Double-click on "Start" using the let mouse button.
4. Select the desired language.
5. Select "Open User Manual rom CD" or "Check for new
version of User Manual online".
To call up the iles, you need the program Adobe Reader. It
has been included on the CD or can be downloaded ree of
charge rom www.adobe.com.
If you would like a printed copy of the General User Man-
ual, you can have the document sent to you ree of charge
by requesting it rom the following address:
Derby Cycle GmbH
Siemensstrasse 1-3
49661 Cloppenburg, Germany
+ 49 (4471) 966-0
info@derby-cycle.com
Original User Manual | Pedelec Impulse 2.0 Ergo 3