Ofen_477445.book Seite 59 Donnerstag, 5. Juni 2014 9:15 09
2a) External, chemical, or physical effects during transport, storage, installation, and use of the
appliance (e.g., cooling with water, spilled food, condensation water, overheating due to
improper use (e.g., open ash door), or even the formation of hairline cracks on enamelled
parts are not considered to be quality faults
2b) Incorrect selection of stove size
2c) Non-observance of the respectively valid regulations
2d) Fault in the installation and connection of the appliance
2e) Insufficient draught or draught that is too strong
2f) Improperly performed servicing work or other, especially subsequent changes in the fire-
place or exhaust line (stove pipe and chimney)
2g) Use of unsuitable fuels
2h) Incorrect operation; overload of the appliances (see the operating instructions of the man-
ufacturer)
2i) Wear of iron, chamotte, or glass parts directly exposed to flames insofar as they are not
subject to the warranty (1a)
2j) Improper handling
2k) Insufficient care, use of unsuitable cleaning agents
Complaints
We ask that you submit any complaints only to your dealer or DIY market. In the process, you
must name the type and manufacturing numbers of your stove. This information can be found
on the type plate on the back of the appliance.
Information for spare parts orders
WARNING!
Danger of product damage and injury
The fireplace must not be changed. Only spare parts that have been expressly
approved or offered by the manufacturer may be used. If required, please contact your
dealer.
In case of spare parts orders, please specify the type and manufacturer numbers of your stove.
This information can be found on the type plate on the back of the appliance or in the data
sheet/inspection log. In addition, please observe the technical drawings and tables on the data
sheet, which contain the correct name of the required spare part.
Disposal
Disposing of the product
Do not dispose of the product with the household waste! Proper disposal is mandatory. Infor-
mation can be obtained from the responsible waste disposal facility.
Disposing of packaging
The packaging consists of cardboard and correspondingly marked plastics, which can
be recycled.
– Take these materials to a recycling facility.
GB
59