KORADO Z-TB-RF Handbuch Seite 172

• PIN code activation/deactivation
If you have just activated your PIN code, follow the steps below. Alternatively, you must
complete steps 1 and 2 of the initialization process and steps 1 and 2 of the activation
process again before you can personalize your PIN.
EN
Please note that PIN code personalization can only be done after PIN code initialization
and activation has been completed.
1. When appears, press
least 5 seconds.
2. The code 0000 is displayed and the
first digit flashes. Press
to select the first digit you want, then
press the
Repeat this operation for the remaining
3 digits.
3. Press the
new code is now saved.
or
button to save and exit.
button to confirm. The
for at
48
5 s