Integrated Weekly And Daily Programme, Energy Saving; Automatic Programming With Self-Learning Process - Korado Z-Tb-Rf Handbuch

INTEGRATED WEEKLY AND DAILY PROGRAMME, ENERGY SAVING

AUTOMATIC PROGRAMMING WITH SELF-LEARNING PROCESS

This function is available for heaters equipped with an occupancy detector.
EN
• Overview
Automatic programming (Auto): After an initial learning period of one week, the
remote-controlled device will analyse occupancy cycles to determine and implement
a weekly programme adapted to your life cycle, alternating between Comfort and Eco
periods, with the aim of providing the most efficient yet comfortable and user-friendly
heating cycle.
The control algorithm of the ventilation unit will constantly learn and adapt to changes
in your occupancy patterns, in order to optimize the heating programme according to
changes in your occupancy patterns.
• Operation
When you first activate your device, the "automatic
programming" mode is activated by default in Auto
mode. To deactivate and change a programme, see
Selecting and assigning programmes on page 28.
The first week of operation is a learning week, during
which the device will remember your habits and work
out your programme for the week.
It therefore defines a programme made up of a period
with Comfort and Eco modes, independently for each
day of the week.
During this learning week, the device will temporarily
operate permanently in Comfort Mode.
Important: To
programming, ensure that the occupancy sensor
is not interfered with by an external source, see
the heater's operating manual.
ensure optimum automatic
Example of display in Eco
22
Example of display in
Comfort mode period
mode period