KORADO Z-TB-RF Handbuch Seite 150

• Selection of programmes
Schematic programme sequence:
Auto
EN
Device with occupancy sensor: The device comes standard with self-learning
mode enabled, as described on page 22. If this programme suits your
requirements, you do not need to do anything further, the device will follow an
automatic programme after an initial weekly learning period that will continue
to adapt to your occupancy cycles.
Another version: your device's default settings is continuous Comfort mode
for 7 days a week.
• Selection of programmes
Auto: automatic programming (see Automatic programming with self-learning
-
process on page 22).
- Comfort: your device will operate in Comfort mode, 24 hours a day, every selected
day.
Note: You can set the Comfort mode temperature to the value you want (see
Setting the Comfort mode temperature on page 19).
- Eco: the device will operate in Eco mode 24 hours a day.
Note: You can set the temperature reduction parameters (see page 34).
- P1: your device will operate in Comfort mode from 06:00 to 22:00 (and in Eco
mode from 22:00 to 06:00).
P2: your device will operate in Comfort mode from 06:00 to 09:00 and from 16:00
-
to 22:00 (and in Eco mode from 09:00 to 16:00 and from 22:00 to 06:00).
- P3: your device will operate in Comfort mode from 06:00 to 08:00, from 12:00 to
14:00 and from 18:00 to 23:00 (and in Eco mode from 23:00 to 06:00, from 08:00
to 12:00 and from 14:00 to 18:00).
Comfort Eco P1
26
P2 P3