Dual Optimization Function - Korado Z-Tb-Rf Handbuch

• Occupancy detection, activation/deactivation
This function is available for heaters equipped with an occupancy detector. By default,
occupancy detection is activated.
1. Press or
= Factory reset
= Factory settings will not be restored
Important: If occupancy detection has been deactivated and the device is
in Automatic mode:
- Regardless of the current programme, the device will not automatically lower the
temperature and switch to Freeze Protection mode after 72 hours of absence.
- If automatic programming was in progress before the detector was deactivated, it
will no longer be used.
The next time occupancy detection is reactivated, the device will use the smart
programme created prior to deactivation and go on to relearn life patterns to adjust
them.
See page 22 - Automatic programming - auto-adaptive self-programming
2. To save and automatically move to the next settings, press
installation settings, press the

DUAL OPTIMIZATION FUNCTION

This function is available depending on the model (see the instruction manual of the
heater).
.
button three times.
5 s
43
EN
. To exit the