Remove The Product Cylinder - Ecolab Smartpower Rtu Dispenser Bedienungsanleitung

7.2.3

Remove the product cylinder

Personnel:
Protective equipment:
Requirements:
n Angle valve for water supply closed.
n Hinged cover is open.
Front hatch open.
n
3
Fig. 10: Loosen the product cylinder
1.
If necessary, remove the SMARTPOWER
2. Unscrew the two countersunk screws
3.
Remove the product cylinder
4
2
Fig. 11: Remove the product feed
4.
Pull the product feed
5. n Clean the product feed using a damp cloth.
n Rinse product cylinder with clean water.
n Operator
Protective eyewear
n
Chemical resistant protective gloves
n
Ä Chapter 7.2.2 'Opening the front hatch' on page 36
1
2
with the product feed
2
3
out of the product cylinder
3
Servicing and maintenance
Countersunk screw
1
Product cylinder
2
Product feed
3
TM detergent capsule.
.
1
3
Product cylinder
2
Product feed
3
O-ring
4
.
2
37
facing upwards.
MAN054127 Ver. 01-06.2024