ECOLAB SMARTPOWER RTU Dispenser Bedienungsanleitung Seite 86

Assembly and connection
Wall-mounting
Personnel:
Protective equipment:
Tool:
Requirements:
n The suitability of the wall for wall mounting has been tested.
n The necessary supply connections are available.
n The installation location is suitable for the operation of the unit.
Fig. 3: Mounting the unit (with the rinse dispenser as an example)
Mounting plate
1
1.
Select the final location of the SMARTPOWER
Retaining pin
accordance with the Fig. 3 .
2
Unit
3
Drill the fixing holes and place the Æ 6 mm dowels.
2.
Setting up the unit
4
3.
Attach the mounting plate
Press the unit down
5
4.
SMARTPOWER
Locking plate
6
5.
SMARTPOWER
on the top of the unit clicks into place.
MAN054127 Ver. 01-06.2024
n Service Personnel
n Qualified employee
n Protective gloves
n Safety shoes
n Protective eyewear
n Drill
n Spirit level
2
1
with dowel screws.
1
TM RTU Dispenser
TM
RTU Dispenser Press the down
6
3
TM
RTU Dispenser and drill holes in
Put the on the retaining pins.
3 2 4
until the locking tab
5
28
5
4
1
6