Commissioning / Operation; Initial Start-Up - Ecolab Smartpower Rtu Dispenser Bedienungsanleitung

6

Commissioning / operation

6.1

Initial start-up

Personnel:
Protective equipment:
Requirements:
n The SMARTPOWER
Ä Chapter 5 'Assembly and connection' on page 26
1. Open shut-off valve on water supply pipe.
2. Check that all hoses, connections and components are tight.
3.
In the SMARTPOWER
detergent capsule.
4. Close the sink drain.
1
Fig. 6: Remove product
5. Press the release button
n Service Personnel
n Protective gloves
n Safety shoes
n Protective eyewear
TM
RTU Dispenser is correctly assembled and installed.
TM RTU Dispenser, insert a suitable SMARTPOWER
Make sure the labels on the product and the dispenser match.
The colour and shape of the detergent capsule correspond to the product
symbol on the hinged cover.
2
.
1
If more cleaning solution is required, the release button can be locked in
place by pressing and turning to the right
Commissioning / operation
Press
1
Turn to the right
2
.
2
31
TM
MAN054127 Ver. 01-06.2024