Date-Time Setting - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

HEADER LINE
In the header line there are main menu, icons about communication and the time.
Touch any of main menu tags to activate it. With the MENU button you can call the
setup menu. With PROGRAM and MANUAL you can change these two modes.

DATE-TIME SETTING

Touch the time area on the top right side on the screen and the TSC will switch to the
DATE-TIME menu.
 Date and time can be set with the '–'and '+' buttons.
 The time format can be selected by touching its text.
 GPS/DCF77 date/time synchron: if this option is enabled and and an USM
module with GPS receiver or DCF77 receiver is connected via IMC line, then
date and time will be automatically synchronized. In this case also important to
set the correct time zone value.
 If Auto change summer time is enabled then date and time will be set
automatically.
 CANCEL – the window close without any changes in memory
 OK – the window closes and the all modifications will be saved
Information about GPS/DCF77 date/time synchronisation:
In the header line of the main screen next to time value an icon for GPS date/time
information is displayed in different colors.
black: synchronisation not enabled
red: synchronisation enabled, but no incoming GPS signal is detected
green: synchronisation enabled and operating correctly
MBN GmbH

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
30