Code; Factory Default - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

FACTORY DEFAULT

The user can restore the factory default settings. Only the selected module data will
be restored. This operation will overwrite all the user modifications!
 System parameters - these parameters will restore: language to English,
brightness, zone names, appearances menu parameters, program window
menu parameters
 Preset colors – preset colors will be overwritten with default colors
 Programs – all programs will be deleted
 Own logo – the user loaded logo will deleted

CODE

The user can lock modifiable parameters. In this menu it is possible to enter a PIN
code. Click on the CODE ENABLE check box, type a four number PIN code and
press OK. The PIN code must be retyped again and press OK. If the codes are equal
then it will be activated.
MBN GmbH

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
35