Delete Program - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

Touch the SET WAIT/SPEED BUTTON to open the set wait/speed window.
On the left side the WAIT time can be adjusted with the '+' and '-' buttons.
On the right side the SPEED time can be adjusted with the '+' and '-' buttons.
In the center of the screen the changing range can be selected. The maximum
selectable time can be 2 hours.
 GRADE radio group – parameter adjust by selected value (0.05sec, 0.1sec,
1sec, 10sec, 1min)
 WAIT + wait time is increased by selected grade value
 WAIT - wait time is decreased by selected grade value
 SPEED + speed time is increased by selected grade value
 SPEED - speed time is increased by selected grade value
 Immediate load: After program start the scene will be loaded immediately
without the selected speed time.
 CANCEL – the window closes without any changes in memory
 OK – the window close and the software will save all modifications

DELETE PROGRAM

Touch and hold touched one program button to open the EDIT BUTTON window.
Touch the DELETE BUTTON to delete the selected program.
ZONA SYNC
If you want start and stop programs same time in different zone, then here you can
set it.
MBN GmbH

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
44