Sensor Module - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

Montageanleitung / Installation manual

SENSOR MODULE

If USM modules are connected via IMC line, they can be used to select the
Programm buttons. Each USM device provides 8 input contacts.
You can enter and edit a name for each USM module. This makes it easier to identify
different devices.
The contact type can be switch or push.
The program which is controlled by a switch type contact always starts if the contact
closes and stops if the contact opens.
The program which is controlled by a Push type contact always reverts its state if
contact close, and happens nothing if contact opens.
  
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany
46
www.proled.com