Controlling Dmx Devices; Main Screen - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

CONTROLLING DMX DEVICES

The TSC can control four zones. One zone means one light output. The type of light
output can be:
 DIMMER 1:1 – 1 control channel –> 1 output channel
 DIMMER 1:2 – 1 control channel –> 2 output channels (the value of the control
channel goes to two dmx channels)
 DIMMER 1:3 – 1 control channel –> 3 output channels
 DIMMER 1:4 – 1 control channel –> 4 output channels
 DIMMER 1:5 – 1 control channel –> 5 output channels
 DIMMER 2:2 – 2 control channels –> 2 output channels
 DIMMER 3:3 – 3 control channels –> 3 output channels
 DIMMER 4:4 – 4 control channels –> 4 output channels
 DIMMER 5:5 – 5 control channels –> 5 output channels
 RGB – red, green, blue
 RGBA – red, green, blue, amber
 RGBW – red, green, blue, white
 RGBAW – red, green, blue, amber, white
DMX addresses for the zones can be also configured, but these are defaults settings:
 Zone 1 – DMX ADDRESS 001 - 003
 Zone 2 – DMX ADDRESS 004 - 006
 Zone 3 – DMX ADDRESS 007 - 009
 Zone 4 – DMX ADDRESS 010 - 012

MAIN SCREEN

MBN GmbH

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
29