PROLED Touch Control LCD RGB DMX Benutzerhandbuch Seite 40

Color Selection in RGB Mode
Color Selection in RGBA or RGBW Mode
MBN GmbH
Color Selection in DIMMER Mode
DIMMER: The DIMMER has only one channel. Its
value can be set with one slider.
RGB: The RGB mode has 3 channels. In palette
mode you can select a color directly from the
palette. Each color on the palette consist of all the
3 primary colors (RED, GREEN, BLUE), and one
of them is always 100%.
To regulate the selected color to 0% you can do it
by BRIGHTNESS slider.
In slider mode you can set the channel value with
the sliders separately.
To change between palette mode and slider mode,
touch the RGB icon in the top left corner of the
screen.
RGBA or RGBW: The RGBA or RGBW mode has
4 channels. In slider mode you can set the channel
value with the sliders separately. In palette mode
you can select a color directly from the palette.
Each color on the palette consist of all the 3
primary colors (RED, GREEN, BLUE) and an
additional color (AMBER or WHITE), and one of
them is always 100%.

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
40