Change Program Name; Add New Scene To An Existing Program; Set Speed And Wait Time - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

Montageanleitung / Installation manual
CHANGE OR SET PROGRAM PARAMETERS
Touch and hold touched one program button to open the EDIT BUTTON window.

CHANGE PROGRAM NAME

Touch and hold touched one program button to open the EDIT BUTTON window.
Touch the RENAME BUTTON to open the text editor. If the program name has no
character then the auto name can be seen on the program button (P: number of
program – S: number of program step).

ADD NEW SCENE TO AN EXISTING PROGRAM

Touch and hold touched one program button to open the EDIT BUTTON window.
Touch the ADD SCENE button to go to manual mode. Select a color and press OK.
Now the program has one more scene. If the program is running, then the scenes of
this program will loaded one after the other. The loading time of a scene is the
SPEED time. The waiting time between two scenes is the WAIT time. These two
program parameters can be change by the user in each program. Up to ten scenes
can be added to each program.

SET SPEED AND WAIT TIME

Touch and hold touched one program button to open the EDIT BUTTON window.
  
MBN GmbH Balthasar-Schaller-Str. 3 86316 Friedberg Germany
43
www.proled.com