Introduction; Installation; Connections - Proled Touch Control Lcd Rgb Dmx Benutzerhandbuch

INTRODUCTION

The MBNLED TOUCH CONTROL LCD RGB DMX (abbreviated: TSC from Touch
Screen Controller) is able to control DIMMER, RGB, RGBA, RGBW or RGBWA lights
via DMX protocol. One TSC can control four zones and more TSC's can be
connected with each other. Each TSC can reach all connected TSC zones.
The DMX output of the TSC is RDM compliant, so it can control RDM compatible
devices and besides all the advantages of RDM it is also able to check sensor values
of DMX devices (such as temperature, voltage and many more...) and can handle
special events, if any sensor value should exceed the normal range.

INSTALLATION

The TSC requires an AC/DC voltage of 12V / 1000mA. It has two communication
lines - one for DMX and one for IMC (inter module communication). The cable
connections are easily made with screw terminals.

CONNECTIONS

 Power: 2 wires, 12-24V AC/DC - 1000mA
 DMX output: 3 wires
 IMC data: 3 wires
MBN GmbH

Balthasar-Schaller-Str. 3
www.proled.com
Montageanleitung / Installation manual

86316 Friedberg

Germany
27