Introduction; Technical Specifications - Tau Rpb Installationsanleitung

1. INTRODUCTION

RPB Vehicle and Pedestrian Detection Radar is designed to manage the entry and exit
to/from a parking lot or underground garage. It can be used as an anti-collision sensor
(AS A CLOSING SAFETY DEVICE) or as a trigger sensor that can control the opening and
closing of the barrier.
The radar detection area can be configured with the App, via Bluetooth. Compared to
traditional loop detectors, it is much more convenient, intelligent and does not require
road excavations for the creation of magnetic loops.
The radar with RF-SOC chip built-in, is equipped with microwave technology. It is a
small-sized device, with the ability to work in all weather conditions with high de-
tection, sensitivity and high precision. Easy debugging and installation radar with
excellent stability and reliability. It is a new type of radar that can be a perfect alterna-
tive to magnetic loop detectors.
The radar antenna gives the radar good angular resolution and high accuracy in mea-
suring the angles.
With the perfect combination of software and hardware, this product can accurately
identify obstacles crossing the detection area, preventing the barrier from accidentally
closing, injuring people and/or damaging vehicles.

2. TECHNICAL SPECIFICATIONS

Model
Detection distance
Detection width
Working frequency
Supply voltage
Power
Output
Interface
Dimensions
Enclosure rating
Working temperature
Cable lenght
Certification
RPB (built-in antenna)
1 - 6m (default 3m)
0.5 -1.5m (left) / 0.5 -1.5m (right)
79GHz
9-24 V DC / 1A
< 2.5W
Relay: NO/NC
Bluetooth
107.9 x 73.6 x 17.2 mm
IP65
-40° C ~ 85° C
1 m
CE. FCC. RoHS
15