Installation - Dometic TEC30D EV Montageanleitung

Installation

9 Installation
!
CAUTION! Beware of injury
The generator may only be installed by qualified personnel from a
specialist company. The following information is intended for
technicians who are familiar with the guidelines and safety precautions
to be applied.
9.1 Note on installation
Read the installation manual carefully before you install the generator.
When installing the generator, note the following:
D
DANGER! Danger of electrocution
Disconnect all power supplies when working on the generator.
!
CAUTION! Beware of injury
• Improper installation of the generator can result in irreparable
damage to the device and put the safety of the user at risk.
• Always wear the recommended protective clothing (e.g. protective
goggles, gloves).
9.2 Securing the generator
Note on installation location
• Make sure that no combustible objects are stored or installed near the air outlet
or the ventilation slots.
• If the installation location is closed on all sides create air intake openings in front
of the maintenance cover with a cross-section of at least 240 cm
• For safety reasons, note the location of existing wiring harnesses, wires and other
components within the installation area, in particular those which are not visible,
when installing the generator (when drilling or screwing etc.).
• Leave a space of at least 70 mm between the generator hood and surrounding
parts so that sufficient space remains for cooling air to pass through.
You can secure the generator in two ways:
• Hanging installation (fig. 2 A, page 3)
• Upright installation (fig. 2 B, page 3)
22
TEC30D EV
2
.
DE