Siemens SIMATIC Rack PCs Kurzanleitung Seite 14

Cleaning
Only clean the devices when they are switched off.
Clean the device with a damp cloth and make sure that no water enters the device. Observe the information on chemical
resistance of the device found at Chemical resistance of the HMI devices and industrial PCs
(https://support.industry.siemens.com/cs/ww/en/view/39718396) and supplementary information in the Operating
Instructions (https://support.industry.siemens.com/cs/de/en/view/109744171).
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer. Observe the
information in the Operating Instructions (https://support.industry.siemens.com/cs/de/en/view/109744171).
Recycling and disposal
Contact a certified disposal service company for electronic scrap for environmentally sound recycling and disposal of your old
device. Dispose of the product in compliance with the respective regulations in your country.
Accessories
Information on approved accessories can be found in the Operating Instructions
(https://support.industry.siemens.com/cs/de/en/view/109744171).
Country-specific information
WARNING
Connecting cable that complies with safety regulations is required
There is a risk of fire and electric shock if you use an AC or DC connecting cable that does not comply with local safety
regulations. This may result in personal injury or damage to property.
• Ensure that the AC or DC connecting cables comply with the safety regulations of the country in which the device is
installed and that they bear the markings required in each case.
• Connect the protective conductor in accordance with the operating instructions.
SIMATIC Box PC, SIMATIC Panel PC and SIMATIC Rack PC
A5E52123775-AA, 11/2022
13