English - Siemens Simatic Rack Pcs Kurzanleitung

SIMATIC IPC
Industrial PCs
SIMATIC Box PC, SIMATIC Panel PC and SIMATIC Rack PC
Compact Operating Instructions
Original instructions

English

1 Notes on safety and commissioning
These Compact Operating Instructions contain the most important safety and commissioning information for your device.
You can find brief instructions on how to install and connect the device in the Quick Install Guide.
Note
Read the Operating Instructions and the Quick Install Guide before installing and connecting the device.
Documentation
The Operating Instructions, Quick Install Guides and Product Information documents for SIMATIC Industrial PCs can be
found on the Internet at:
• https://support.industry.siemens.com/cs/ww/en/view/109744171
(https://support.industry.siemens.com/cs/de/en/view/109744171)
Firmware
The latest firmware versions for SIMATIC Industrial PCs can be found on the Internet at:
• https://support.industry.siemens.com/cs/ww/en/view/109763408
(https://support.industry.siemens.com/cs/ww/en/view/109763408)
Unpacking and checking the delivery
1. When you receive the delivery, check the package and its contents for visible transport damage.
2. If any transport damage is present at the time of delivery, lodge a complaint at the shipping company in charge. Have the
shipper confirm the transport damage immediately.
3. Keep the original packaging in case the device needs to be transported again.
4. If the contents of the package are incomplete, damaged or do not correspond to your order, you can use the After Sales
Information System (ASIS) (http://siemens.com/asis) to provide feedback on product deliveries and repairs.
Complete the online form for product delivery (quality control notification) under the heading "Product delivery: Feedback
on quality control and repairs".
WARNING
Electric shock and fire hazard due to device damage
A damaged device may be under hazardous voltage and start a fire in the machine or plant. A damaged device has
unpredictable properties and states. This may result in personal injury or damage to property.
• Prevent installation and commissioning of a damaged device.
• Label the damaged device and keep it locked away. Have the device repaired without delay.
5. Observe the following when storing the device:
Store the device in a dry place.
–
Bring the device to room temperature before commissioning.
–
Do not expose the device to direct heat radiation from a heating device.
–
If condensation develops, wait approximately 12 hours or until the device is completely dry before switching it on.
–
6. Keep the enclosed documentation in a safe place. It belongs to the device. You need the documentation when you
commission the device for the first time.
7. Make a note of the identification data of the device.
© Siemens AG 2022. All rights reserved
A5E52123775-AA, 11/2022
9