Features; Precautions - Sony Rm-Pj1001 Bedienungsanleitung

Table of Contents
Features ............................................................................ 17
Precautions ....................................................................... 17
Location and Function of Controls ................................ 18
Battery Installation .......................................................... 23
Connecting to the Projector ............................................ 24
Specifications .................................................................... 25

Features

The RM-PJ1001 is a Remote Commander which operates
Sony VPD/VPH/VPL/RVP series projectors.
When using two or more projectors, the Commander
controls each projector separately or all simultaneously if
they are assigned the index numbers set on each projector or
the IFB-101 interface board installed on each projector.
The Commander is also used as a wireless commander for
projectors equipped with a remote control detector. For
details on connection, refer to the instruction manual of the
projector and the IFB-101.

Precautions

• Should any liquid or solid object fall into the cabinet,
remove the batteries and have the unit checked by
qualified personnel before operating it further.
• Keep the unit away from extremely hot or humid places.
• Do not install the unit near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight,
excessive dust or humidity, mechanical vibration or shock.
• Keep the unit away from strong magnetic field or
mechanical vibration.
• Clean the unit with a dry soft cloth, or a soft cloth lightly
moistened with a mild detergent solution. Do not use any
type of solvent, such as alcohol or benzine, which might
damage the finish.
• Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your unit.
For maximum protection, repack the unit as it was
originally packed at the factory.
EN
17