Advanced Features; Controlling The Volume Of Visual Components Connected To An Audio System - Sony RM-VL700T Bedienungsanleitung

Advanced Features

Controlling the Volume
of Visual Components
Connected to an Audio
System
The Commander is factory preset
based on the assumption that you
hear the sound of your visual
components from your TV
speakers, and that you hear sound
of your audio components from
the loudspeakers connected to
your amplifier.
For example, to control the
volume while using a VCR, you
don't need to press the TV button
to control the TV volume.
The following table shows the
factory setting of which volume
would be controlled for each
component.
Component Select
button
TV
VCR
CBL/SAT
DVD
AMP
GB
24
Controls the volume of
TV
TV
TV
TV
amplifier
However, if your visual
components are connected to an
audio system, you may want to
hear TV or VCR sound from the
loudspeakers via your amplifier,
not from your TV speakers. In this
case, you need to change the
factory preset so that you can
control the volume of your visual
components without first having
to switch to the amplifier.
To change the Factory Preset of
the Volume Control
1
2