Displaying Time/Date For Individual Extreme Values; Deleting Min/Max Values; Other Functions; Moon Phase Display - Conrad Electronic WS333 Edition Bedienungsanleitung

The point of time and date of incidence of the extreme value are also stored for all figures.
Pressing the "MIN/MAX" key switches between the display of the minimum values, the maximum values and
the normal display. Proceed in retrieving the stored date as follows:
• Retrieving minimum values
Press the "MIN/MAX" key. "MIN" appears in the centre.
The minimum values are now overlayed in the displays concerned. No display takes place for wind and rain
(minimum value would always be "0").
• Retrieving maximum values
Press the "MIN/MAX" key once again (starting from the normal display press the key twice). "MAX" appears
in the display in the centre.
The maximum values are displayed in the display fields concerned.
• Returning to normal display
By pressing the "MIN/MAX" key, return to the normal display takes place, the overlay "MAX" disappears
from the display.

Displaying time/date for individual extreme values

If necessary, you can have the appropriate time or date of incidence displayed for each individual extreme
value.
Proceed as follows:
• First of all, select the display of the minimum values (press "MIN/MAX" key once, overlay "MIN" in the
LCD) or the maximum values (press "MIN/MAX" key twice , overlay "MAX" in the LCD).
• The desired value can now be displayed by pressing the "SENSOR" several times.
Order of display:
indoor temperature indoor humidity outdoor temperature
value, not for "TOTAL") wind velocity (only MAX value)
Only one display field is displayed with its extreme value at one time; the point of time and date of
incidence of the extreme value appears below in the time display.
• Pressing the "SENSOR" key again leads back again to the complete display of all extreme values (MIN or
MAX according to whether you have selected the minimum or maximum values at the beginning).

Deleting MIN/MAX values

Press the "MIN/MAX" key once to display the MIN value or, twice, to display the MAX value.
than two seconds. Press the "SENSOR" key so often until the value is displayed which you wish to delete
(e.g. outdoor temp.).
Press the "RAIN/RESET" key now for longer than 2 seconds and then release the key. Instead of the previ-
ously displayed value, bars will become visible meaning that the value has been deleted.
Now select either another value with the key "SENSOR" to delete (e.g. wind velocity) or press the key
"MIN/MAX" so often until the normal display appears.
46
outdoor humidity rain quantity (only MAX
c) Other functions

Moon phase display

The moon phase display appears with the following symbols:
Full-moon Waning
The moon phase display only appears when the time/date have been entered.

Weather Willie

"Weather Willie" displays several weather factors at once as an animated figure:
• Outside temperature (only combination sensor)
Weather Willie's clothing is altered through the outside temperature on the combination sensor.
• Rain
If the weather forecast function has registered "rain", a closed umbrella is displayed.
If the combination establishes rain, the umbrella is put up.
• Wind velocity
For wind velocities of over 20km/h (moderate wind), Weather Willie's hair blows in the wind. If the tem-
perature is under 15°C at the same time, the scarf displayed also blows in the wind.

Weather forecast

The symbols of the weather forecast from the weather station right at the top of the display give the following
forecasts:
Overcast with rain rainy
Overcast cloudy
Overcast with sun bright
Sun sunny
Wind symbol display (windsock)
The windsock symbol in the display field "WIND" shows at a glance whether the wind is at present light,
moderate or strong:
Windsock hanging light wind (< 10km/h)
Airsack half raised moderate wind (10...20km/h)
Airsack horizontal strong wind (> 20km/h)
Immediate rain display
The combination sensor determines not only the rain quantity but also transmits the current status (dry/wet)
of a special sensor. Through this, even one drop can be transmitted to the base station as "beginning rain".
In the LC display of the base station, a symbolic rain drop appears in the field "RAIN". Apart from this,
"Weather Willie" puts up his umbrella.
New-moon Waxing
47