Zusatzbeschreibung / Additional Specification
2.2.4 Mounting Kit
2.2.5 Purge Air Switching
2.2.6 Restrictors
2.3 Method of Operation
2.4 State as supplied
2.5 Accessories
54
The positioner can be mounted on almost all actuators with the
appropriate mounting kit.
see M-chapter-2.2.5
see M-chapter-2.2.6
see M-chapter-2.3
There are no mechanical mounting accessories on the controller in the
state as supplied. These must be ordered and installed according to the
"operating instructions" depending on the application.
The respective connections for single or double-acting versions are
prepared at the factory as ordered.
The pneumatic connections on the rear are sealed.
The station number of each channel is set to 126.
The jumpers for the PROFIBUS segments of the PA-Modules are set to
PAII.
see M-chapter-2.5.6
SIPART PS2 Zusatzbeschreibung
A5E00245544-03