Parkside 471874 2407 Originalbetriebsanleitung Seite 26

GB MT
Note that the user is re-
•
sponsible for any acci-
dents or risks to others
and their property.
Observe noise protection
•
rules and other local reg-
ulations.
Preparation
Protect yourself against
•
splashing water or dirt
by wearing protective
goggles and suitable pro-
tective clothing.
Aerosols may be pro-
•
duced during the use of
pressure washers. Inhal-
ation of aerosols may be
harmful to health. De-
pending on the applica-
tion, the use of fully shiel-
ded nozzles (e.g. surface
cleaners) can significantly
reduce the emission of
aqueous aerosols. De-
pending on the environ-
ment to be cleaned, wear
a suitable respirator of
class FFP 2 or compar-
able to protect against
the inhalation of aerosols
if the use of a fully shiel-
ded nozzle is not pos-
sible.
Do not work with a dam-
•
aged or incomplete
26
device or one which has
been converted without
the permission of the
manufacturer. Before
commissioning, have a
specialist check that the
required electrical pro-
tective measures are in
place.
The device may only be
•
connected to a power
outlet that has been in-
stalled by an experienced
electrician in accordance
with IEC 60364-1.
Prior to use, always
•
check the power cord
and extension cord for
signs of damage or wear
and tear. If the cord is
damaged during use, it
must be disconnected
from the supply network
immediately. DO NOT
TOUCH THE CABLE BE-
FORE IT HAS BEEN DIS-
CONNECTED FROM THE
POWER SUPPLY. Do not
use the device if the cord
is damaged or worn.
If the power cord of this
•
device is damaged, it
must be replaced by the
manufacturer, their cus-
tomer service or by a