Air System - Vevor Rp9563 Originalanleitung

Compatible compressor and air tool:
GUIDELINES FOR PROPER USAGE AND POERATION
Always ensure the use of appropriately matched air tools and compressors. The
compressor should be able to supply a minimal air delivery of 22.0 SCFM@90PSI
to ensure the compressor can run continuously with the VEVOR Air-Powered
Impact wrench. Using tools or a combination of tools that together or separately
require air pressure more than that of which the air compressor can deliver will
reduce performance and could void the compressor or tool guarantee/warranty
Air compressor size
& power
27-28 Gallons
29-31 Gallons
35+ Gallons
Always use clean, dry, regulated, compressed air at 4 to 7bar (60 to 100PSI).

Do not exceed the maximum and minimum pressure. Operating the tool at the

wrong pressure (too low or too high) will cause excessive noise or rapid wear.
It is recommended that a filter-regulator-lubricator be used and be located as

close to the tool as possible.
If a filter-regulator-lubricator is not installed, place up to 6 drops of pneumatic

tool oil into the air inlet plug before each use.
If a filter-regulator-lubricator is installed, keep the air filter clean. A dirty filter

will reduce the air pressure to the tool, which will cause a reduction in power,
efficiency, and general performance.
4HP
Light duty and
intermittent use
Light duty and
intermittent use
Medium duty and
intermittent use

AIR SYSTEM

4-1/2 HP
Light duty and
intermittent use
Medium duty
and intermittent
use
Heavy duty and
continuous use
- 8 -
5+ HP
Medium duty
and intermittent use
Heavy duty and
continuous use
Heavy duty and
continuous use