VEVOR RP9563 Originalanleitung Seite 7

• Do not operate the compressor on a rooftop or in an elevated position that could
allow the unit to fall or be tipped over.
• Always replace a damaged gauge before operating the unit again.
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
• Keep proper footing at all times in order to ensure correct balance.
• Do not wear watches, rings, bracelets, or loose clothing when using any air tool.
• For optimal safety and tool performance, inspect the tool daily in order to ensure
free movement of the trigger, safety mechanisms, and springs.
• Keep the work area clean. A cluttered or dirty workbench may lead to an accident.
Floors should be kept clear.
• This tool is not a toy. Use it with caution.
• Use the tool in a well-ventilated area.
• Verity that the tool has stopped before putting it down after use.
• Handling and storage of oil: Use with adequate ventilation. Avoid contact of oil
with eyes, skin and clothing. Avoid breathing spray or mist. Store in a tightly closed
container in a cool, dry, well-ventilated area free from incompatible substances.
• Do not use the tool near or below freezing temperatures,
as doing so may cause tool failure.
• Do not store the tool in a freezing environment to
prevent ice formation on the operating valves of the tool, as
doing may cause tool failure.
• Disconnect the tool from the air supply and turn off the
compressor before changing any accessories, performing
any maintenance, servicing, when the tool is not in use, when it is being handed to
another person, and when it is left unattended. Failure to
comply may result in moderate injury or damage to
equipment.
• Use safety goggles and ear protection: Wear safety
glasses with side shields when operating the
tool/compressor and verify that others in the work area are
also wearing safety glass.requirements and must provide
protection from flying particles from the front and the sides.
- 6 -