VEVOR RP9563 Originalanleitung Seite 14

When temperatures are below freezing, keep tools as warm as possible using

any safe, convenient method.
Check the air supply for correct size and type of hose connectors. To avoid

loss of power or erratic action, ensure that there is no additional drain on the
air line and no moisture or restriction in the air pipe.
Storage:
Apply an ample amount of lubrication before storing the tool.

Run the tool for approximately 30 seconds after lubricating, in order to ensure

that the lubrication is uniformly distributed throughout the tool.
Store the tool in a clean and dry environment.

The following chart lists common issues and solutions. Please read it carefully
and follow all instructions closely.
WARNING!
Potential hazard that will result in serious injury or loss of life.
If any of the following symptoms appear while the tool is in use, turn it off and

disconnect it from the air supply immediately. Failure to heed this warning will
result in serious personal injury.
Disconnect the tool from the air supply before making any adjustments.

Repairs must be performed by a qualified service technician only

TROUBLESHOOTING
- 13 -