VEVOR RP9563 Originalanleitung Seite 11

WARNING!
Potential hazard that will result in serious injury or loss of life.
Do not use the tool if it is not in proper working order.

Do not use oxygen or any other combustible or bottled gas to power this tool.

Do not use this tool in the presence of any flammable liquids or gases.

Keep hose away from heat, oil, and sharp edges. Check hose for wear and

tear, and ensure that all connections are secure. Failure to comply could lead
to serious injury or loss of life.
Keep hands and other parts of the body away from the work areas when

connecting the air supply. Failure to comply could lead to serious injury or
loss of life.
Loading and operation
Carefully read all instructions provided in this manual and understand them

thoroughly before using the tool.
Do not use Impact wrench accessories other than those that are specifically

designed for use with the Air-powered impact wrench. Failure to comply will
result in serious injury or loss of life.
Verify that the air supply is clean before operating the Air powered impact

wrench.
1. Plug in compressor, turn it on set the pressure regulator to 90psi, attach one
end of the air hose to the compressor and the other end of the air hose to the tool .
Use plumber's tape to avoid air leak ( see section" Technical specifications").
2. Place and lock the socket over the square drive of the Air-powered impact
wrench.
3. Place the socket over a nut to be removed or installed and press the trigger at
the top of the handle to operate the tool.
4. For reverse (R ) rotation, press the speed control knob on the left side of the
tool; For forward (F) rotation, press the speed control knob on the right side of the
tool; Rotate the speed control knob on the left side of the tool during reverse
rotation to control the speed of the air flow as required. Rotate the speed control
OPERATING INSTRUCTIONS
- 10 -