VEVOR RP9563 Originalanleitung Seite 12

knob on the right side of the tool during forward rotation to control the speed of the
air flow as required.
5. After using the tool, disconnect the air hose from the tool.
WARNING!
Potential hazard that will result in serious injury or loss of life.
Hold the tool firmly with hands.

Do not apply additional or excessive force to the tool when working.

Do not allow the tool to run free for an extended period of time. Doing so will

shorten the life of the tool.
Verify that the air supply is clean and air pressure does not exceed 90psi

(6.3bar) while operating the tool. If the air pressure is too high or unclean, it
will shorten the life of the tool. Failure to comply could result in serious injury
or loss of life.
WARNING!
Potential hazard that will result in serious injury or loss of life.
Disconnect the tool from the air supply before changing accessories,

servicing, or performing maintenance.
Only use the tool after replacing or repairing the damaged parts or

accessories.
Use only recommended and properly rated replacement parts and

accessories. Failure to comply will lead to serious injury or loss of life.
Repairs must be performed by a qualified service technician.

MAINTENANCE
- 11 -