Technical Data; General Declaration Of Conformity - Selve Sez-Rc Originalbetriebsanleitung

Technical data/General declaration of conformity

7. Technical data

Series
1/4
1/7
1/10
2/6
2/7
2/9
2/10
2/12
2/15
2/18
2/20
2/30
2/40
Installation location:
After installing the drive, mark the drive type in the technical data table and make a note of
the installation location.
Not all motor types are available in all series and torques. Series 2 motors have a plug-in con-
nection cable. Series 1 and series 3 motors have a 2.5 m mains cable as standard which is per-
manently installed and cannot be replaced.
The relevant cable lengths and qualities for series 1, series 2 and series 3 can be selected in
the catalogue.
Connection cables must be ordered separately.
Information about connections using special connectors must be requested.
Information for all motor types:
Nominal voltage: 230 V AC/50 Hz
Standby consumption: 0.5 W
Safety class: IP 44
Operating time: 4 min.
Radio frequency: 868.1 MHz and 868.3 MHz
Max. transmission output: 10 mW
Note: The maximum radio range is up to 25 m indoors and up to 350 m in the open field.
Subject to change without prior notice!

8. General declaration of conformity

SELVE GmbH & CO. KG company, hereby declares that the SEZ-RC is in con formity with the
basic requirements and other relevant provisions of the Directive 2006/42/EG, 2014/53/EU,
2014/30/EU and 2011/65/EU. The declaration of conformity can be looked up at
www.selve.de
Torque
Rotation speed
Nm Rpm
4 30
7 20
10 15
6 28
7 17
9 28
10 17
12 28
15 17
18 28
20 17
30 17
40 17
63
Power Input
Output
A
0.50
0.50
0.50
0.55
0.41
0.66
0.55
0.75
1.66
0.95
0.75
0.95
1.50
W
115
115
115
124
95
152
124
172
152
220
172
220
345
EN