Selve SEZ-RC Originalbetriebsanleitung Seite 38

Contents
6. iveo initial operation/setting by radio
6.1. Limit position setting and programming the first transmitter
6.1.1. Automatic setup-mode, deletion and automatic setting of
the end positions
6.1.2. Manual setup-mode, deletion and manual setting of the end positions
6.1.3. Manual setup-mode, deletion and manual setting of the end positions
6.2. Programming transmitters/channels
6.2.1. Programming further transmitters/channels
6.2.2. Deleting of transmitters/channels
6.3. Intermediate positions
6.4. Functions in service mode (setting by using a transmitter)
6.5. Adjusting the end limits by using the transmitter
6.6. Reprogramming if a transmitter is damaged or lost
6.7. Resetting to the delivery status
6.8. Group separation
6.9. Changing the radio system to commeo
7. Technical data ____________________________________________________________
8. General declaration of conformity
9. Disposal ________________________________________________________________
10. Troubleshooting
11. SELVE Service Hotline
________________________________________________
_________________________________________________
__________________________________________
_____________________________________________________
___________________________________________
__________________________________________________________
______________________________________________________
_________________________________________
______________________________________
__________________________
___________________________________
____________________________
__________________________
____________________________________
38
__________________
_____
_____
____________________
56
57
57
58
59
60
60
60
60
60
61
61
61
62
62
63
63
64
65
65