Further Safety Instructions - Parkside Pahe 20-Li E5 Originalbetriebsanleitung

■ Kickbacks can occur if the tip of the
blade touches an object or if the
wood bends and the saw chain
Fig. 2
■ If the saw chain
edge of the blade
back violently towards the operator.
■ Any such reaction can lead to you losing
control over the saw and possibly injur-
ing yourself. Do not rely solely on the
chainsaw's built-in safety devices. As the
user of a chainsaw, you can take a num-
ber of measures to avoid accidents and
injury. A kickback is caused by incorrect
use or misuse of the power tool. It can
be avoided by taking proper precautions
as given below:
■
handles of the chainsaw. Hold your
body and arms in a position in which
you can withstand kickback forces. If
suitable measures are taken, the opera-
tor can control the recoil forces. Never
let go of the chainsaw.
■ Avoid an abnormal posture. This will
prevent inadvertent contact with the tip
of the rail and allows a better control of
the chainsaw in unexpected situations.
■ Always use the replacement rails and
turer. Incorrect replacement rails and
saw chains can lead to a tearing of the
saw chain and/or kickback.
gets
jams in the upper
, the blade can kick
■ Follow the manufacturer's instruc-
tions for sharpening and maintenance
of the saw chain. Setting the depth
stop too low can increase the risk of
kickback.
■ Do not saw with the tip of the blade.
This can lead to kickback.
■ Ensure that there are no objects on
the ground that you can trip over.

Further safety instructions

CAUTION! RISK OF INJURY!
► To prevent injuries, never touch the
appliance above the handle
is running!
■ During operation, no other person or
animal may be within a radius of 15 me-
tres. The operator is responsible for third
parties within the warking area.
■ Keep the appliance, the cutting mecha-
nism and the blade guard in good condi-
tion to prevent injury.
■ Before each use, check the appliance
for worn, loose or deformed parts. This
ensures that the safety of the appliance
is maintained.
■ Children should be supervised to ensure
that they do not play with the appliance.
■ Do not use the appliance until you have
familiarised yourself with its use.
■ Do not work with a damaged or incom-
plete appliance or an appliance that
of the manufacturer. Never use the unit
with defective protective equipment. Do
not use the appliance if it has a defec-
security state of the appliance, espe-
cially the blade and the saw chain. If the
appliance has been dropped, check for
-
■ Never start the appliance before the
blade, saw chain and sprocket covers
while it
|
GB / IE