Proline Promag 50W, 53W
Elektrodenbestückung
Prozessanschlüsse
Oberflächenrauigkeit
Endress+Hauser
Mess-, Bezugs- und Messstoffüberwachungselektroden:
• Standardmäßig vorhanden bei: 1.4435, Alloy C-22, Tantal
• Optional: Wechselmesselektroden aus 1.4435 (DN 350...2000 / 14...78")
Flanschanschluss:
• EN 1092-1 (DIN 2501), DN ≤ 300 (12") Form A, DN ≥ 350 (14") Form B
(Abmessungen nach DIN 2501, DN 65 PN 16 und DN 600 (24") PN 16 ausschließlich nach EN 1092-1)
• ANSI B16.5
• AWWA C 207, Class D
• JIS B2220
• AS 2129 Table E
• AS 4087 PN 16
• Elektroden
– 1.4435, Alloy C-22, Tantal: ≤ 0,3...0,5 μm (≤ 11,8...19,7 μin)
(alle Angaben beziehen sich auf messstoffberührende Teile)
43