Endress+Hauser Promag 50W Umbauanleitung

EA00059D/06/A2/13.15
71294946
Conversion Instructions
Conversion transmitter Promag 50/53 W, P, H to Promag 55 remote version
Promag 50W, P, H, 53W, P, H
Instruction is valid for the following conversion kit:
Order-Code Conversion kit
1 × notice label for the sensor
DK5UP8 1 × form data storage
1 × conversion instruction
Overview of the personnel authorized to carry out conversion
Authorization to carry out conversion depends on the approval of the measuring device. The table shows the respective group of persons
for each.
NOTICE
The person who carries out conversion is responsible for safety during the work, the quality of work completed and safety of the device
after conversion.
Approval of the measuring device
without approval
with approval FM/CSA Div. 2
1 Trained customer technician
2 Service technician authorized by Endress+Hauser
3 Endress+Hauser (send measuring device back to manufacturer)
Transmitter that can be used for the conversion
NOTICE
The transmitter for the conversion has to be ordered seperatly. Only transmitter with the following order code can be used:
1 2
Order-Code
Transmitter 5 5
Promag
Products
3 4 5 6 7
X X X – X
Solutions
Group of persons authorized to carry out conversion
8 9 10 11 12
X X X X A, R
1, 2, 3
1, 2, 3
13 14 15 16
C, S, 3 * *
Services
17 18
* * *