Herunterladen Inhalt Inhalt Diese Seite drucken

Auto Mode - Cameo TS 40 WW Bedienungsanleitung

Led theater spot
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
Connect the slave and the master unit (same model) with a DMX cable and activate one of the standalone modes (Sound, Auto, Static, Mac-
ro) on the master unit. Now the slave unit follows the master unit. Press MENU once more to return to the main display. The main display is
automatically activated if no input is made within about 30 seconds.

AUTO MODE

Pressing MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Mode" (lower line) and
confirm with ENTER. Now use the UP and DOWN buttons once more to select the "Auto" sub-menu item, confirm by pressing ENTER twice
to adjust the program speed using UP and DOWN (Program Speed: 00 - 99). Confirm with ENTER and press MENU three times to return to
the main display. The main display is automatically activated if no input is made within about 30 seconds.
STATIC MODE
In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Dimmer, Strobe and Colour Macros
directly on the device with values from 000 to 255. Thus, an individual scene can be created without an additional DMX controller. Pressing
MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Mode" (lower line) and confirm
with ENTER. Now use the UP and DOWN buttons once more to select the "Static" menu item and confirm by pressing ENTER. Using the UP
and DOWN buttons, select the desired function and confirm with ENTER. The value (Dimmer, Strobe etc., see table) of the corresponding
function can now be set from 000 to 255 and press ENTER to confirm the input. Once all of the parameters have been set as desired, press
MODE three times to return to the main display. The main display is automatically activated if no input is made within about 30 seconds.
Static
Function
Dimmer
Dim fine
Strobe
Red
Green
Blue
White
10
Values
000
-
255
0% to 100%
000
-
255
0% to 100%
000
-
005
Strobe open
006
-
255
Strobe slow -> fast <1 Hz - 20 Hz
000
-
255
0% to 100%
000
-
255
0% to 100%
000
-
255
0% to 100%
000
-
255
0% to 100%

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clts40wwClts60rgbwTs 60 rgbw

Inhaltsverzeichnis