Mode Selection; Sound Control Mode; Auto Mode; Slave Mode - Cameo LED TRI MOVER CAN Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

MODE SELECTION:

Press the mode button to select sound mode. The unit will then run via sound

thanks to the built in microphone. Press SETUP to access edit mode (the

last 2 figures will blink), then press the UP or DOWN buttons to adjust the

sound sensitivity level. Press SETUP to confirm. Setting „SU00" stands for

microphone switched off.

The sound sensitivity is adjustable from 01 up to 99 (value 99 stands for

maximum sensitivity).

RGB

01 - 99 sound sensitivity adjustable.

Press the MODE button to enter AUTO mode. The unit will run slowly with

color changing effects.

Press the MODE button to enter SLAVE MODE.

Link the slave unit and the master unit via DMX cable. The slave unit will

follow in sequence with the master unit.

DMX ADDRESS SETTING MODE

Press the MODE button to enter DMX ADDRESS SETTING MODE.

Press SETUP to access edit mode (the last 3 figures will blink). Use the UP

and DOWN buttons to set the DMX address (A001 - A512).

Press SETUP to confirm.

SETUP

Inhaltsverzeichnis

Quicklinks anzeigen

Inhaltsverzeichnis

Clmover1