Introduction - Cameo TS 40 WW Bedienungsanleitung

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where strobes are used.

INTRODUCTION

CONTROL FUNCTIONS:
1-channel, 3-channel, 5-channel DMX control (CLTS40WW)
3-channel, 4-channel, 5-channel, 7-channel and 13-channel DMX control (CLTS60RGBW)
Master / Slave mode
Standalone Functions
FEATURES CLTS40WW:
1 x high-power 40 W warm white COB LED, 15° - 38° beam angle, 1,200 Hz refresh rate, DMX-512 control, RDM enabled, manual control,
manual zoom, 16 bit dimming, master / slave operation, operating voltage 100 V - 240 V AC / 50 - 60 Hz, power consumption 40 W, mounting
bracket and winged barndoor included.
FEATURES CLTS60RGBW:
1 x high-power 60 W RGBW COB LED, RGBW colour mixing, 10° - 41° beam angle, 3,600 Hz refresh rate, DMX-512 control, RDM enabled,
manual control, manual zoom, 16 bit dimming, master / slave operation, operating voltage 100 V - 240 V AC / 50 - 60 Hz, power consumption
65 W, mounting bracket and winged barndoor included.
The spotlight is compliant with the RDM standard (Remote Device Management). This remote management system allows the status query
and configuration of RDM devices via an RDM enabled controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable
parts inside. Maintenance and repairs should be exclusively carried out by qualified service
personnel.