Timer Reservation; Parental Lock - Schweiger DSR 5010 Bedienungsanleitung

Enter "Channel Manager" menu.
Select "Add / Remove Channels"
Add channels from the Total List to your Favorite List.
You can also remove channels from your Favorite List.
Follow the on-screen instructions.
You can re-name your favorite lists. Enter "Edit List
Name".

8.5 Timer Reservation

Use this function to make a timer recording on a connected
VCR or switch ON /OFF this receiver at preset times.
You can book up to 10 timer events.
Press the TIMER button on the remote control.
The message "Please set user time first" appears,
followed by the "User Time Setting" screen. Set user time
according to the current time. If the user time is already
set, this step will be skipped.
When the "Recording List" screen appears select a blank
position and then press OK.
The screen "Recording Setting" appears. To record an
event, enter information such as, channel, start time, end
time, event type (Once, Daily, Weekly), etc. When the
settings are completed, select "Recording" and then
press the OK button.
You can check the timer recording settings from the
Recording List.
Note: If there is a pending timer event active, it makes no difference whether or not the unit is
switched off ("Standby") or used normally. The unit will be switched on or change over to the
desired program in any case in time to execute the scheduled event. - If the device is switched to
OFF by using the front panel POWER button the system clock time will be lost along with the
scheduled timer recording.
One minute before the recording start time a message appears, asking whether or not to proceed
with the recording. To proceed with OK or exit with CANCEL.

8.6 Parental Lock

This allows you to lock particular channels or the receiver
itself. For example, you can prevent your children from
accessing adult programs using this function.
Select "Parental Lock Manager" from the Main Menu.
When the "Enter Password" message appears, enter the
password.
The factory default user password is '0000'
Select "Channel Lock" when you wish to lock specific
channels only. (if someone switches to a locked channel,
the password screen will appear.)
Select "Access Lock" when you wish to lock the receiver
when it is powered on. The password will be required
before starting up.
Select " Menu Lock" When you wish to lock the Menu when you don`t want to change in
initial menu
15
GB