Schweiger DSR 5010 Bedienungsanleitung Seite 37

4). Select IF Frequency by using Left/Right button.
IF Frequency
1210MHz
1420Mhz
5). After selection of IF Frequency, IF Channel will be saved by pressing "Back" or "EXIT" button
on RCU.
6). Each receiver connected to Unicable LNB MUST use different IF Channels.
7). After the setting, please switch it off for the connection to the other receiver. Setting process is
same as the above way.
8). The above setting values will be initialized by Reinstallation.
IF Channel
1
2
11
GB