Schweiger DSR 5010 Bedienungsanleitung Seite 34

3. Analog Video Output
Analog video output for connecting Home Theatre systems or monitors. The available video
output signal format is "CVBS"
4. Digital Audio Output (Coaxial)
Dolby Digital and Linear PCM Stereo output for digital input of a HiFi or A/V system with
integrated digital decoder.
5. Analog Audio Output (Stereo)
Audio Stereo L/ R signal for connecting your TV, HiFi or Home Theatre system.
6. SCART Connector (TV)
For connection of all audio and video signals of this digital receiver to the TV set.
7. SCART Connector (VCR)
For connection of all audio and video signals of this digital receiver to a video cassette recorder
(VCR).
8. VHF / UHF Antenna Input
The signal supplied to this connector from a TV antenna (or a local cable TV network) will be
sent to the TV OUT connector.
9. UHF Modulator Output
GB
It provides audio and video signals from this receiver, modulated on a UHF channel of your
choice. If needed, connect the TV / VCR antenna input with a RF cable.
10. LNB Input (IF INPUT)
Connect your satellite antenna system (LNB, multi-switch) to this jack.
11. LNB Loop-Through Output (IF OUTPUT)
If you have another analogue or digital satellite receiver and you wish to use the same LNB, then
you can connect it to this "LNB loop-through" output jack.
CAUTION:
Do not mix up IF INPUT and IF OUTPUT jacks when connecting your satellite antenna!
8