Relationship To The Authorities; Installation Requirements - Jøtul S 120 - I 160 Montage- Und Bedienungsanleitung

Tilläggsutrustning
Sidoanslutning för hög modell
Det går att använda ett sidorökrör för den höga modellen. Byt
ut den näst översta stenen mot en sten som försetts med hål för
rökröret - kat.nr 350779.
Golvplåt - kat. nr. 350984
Till Jøtul FS 160 - I 160 levereras stålplåt i storlek 555x400x1 mm.
ENGLISH
1.0 Relationship to the
authorities
Soap stone surround for Jøtul I 160
The insert is intalled in accordance with the installation and user
instructions for Jøtul I 160.
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing the
product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
inspected by a qualified person.
A product data label in heat resistant material can be found on the
heat shield at the back of the product. This contains information
about identification and documentation for the product.
2.0 Technical information
Height low version
Height high version
Width:
Depth:
Weight of surround:
Weight including insert:
Height centre flue outlet -
low version:
high version:
Optional equipment:
3.0 Installation
requirements
3.1 Distance from product to flammable
material:
See fig. 1 a
3.2 Foundations
Ensure that the floor is strong enough for the fireplace. See "2.0
Technical data" for weights.
1,250 mm
1,750 mm
760 mm
455 mm
Low 265 kg, high 382 kg
Low 370 kg, high 487 kg
fig. 12
fig. 13
Stone for side flue outlet -
high version
Floor plate
7