Explanation Of Symbols; Intended Use - Renkforce Smart USB Bedienungsanleitung

2. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where
there is a health hazard, e.g. from electric shock.
The exclamation mark in a triangle indicates important notes
in these operating instructions that must be observed strictly.
The "arrow" symbol indicates that special advice and notes on
operation are provided.

3. Intended Use

The product has not only a conventional LC display but also an integrated
projector that can display the time on the room's ceiling.
The time and date are automatically set by DCF time signal. It can also be
set manually, however (e.g. in case of reception problems). The projec-
tion clock has two mutually independent alarm times and one time zone
setting; the indoor temperature can also be measured and displayed.
The projection clock is supplied with power either via an enclosed mains
adapter or via two batteries of type AA/mignon. At operation via the plug-in
mains adapter, permanent projection of the time is possible.
A suitable Smartphone can be charged via the USB socket. It can be
placed in a holder at the top of the projection alarm clock.
The safety notes and all other information in these operating instructions
always have to be observed. Read the operating instructions precisely
and keep them. Only pass the product on to any third parties together
with the operating instructions.
Any other use than that described above is not permitted and will damage
the product. Additionally, this is connected to dangers, such as short
circuit, fire, electric shock, etc.
28