F) Setting/Selecting Second Time Zone; Setting Second Time Zone; Switching Between Normal Time And Second Time Zone; Alarm Function - Renkforce Smart USB Bedienungsanleitung

f) Setting/Selecting Second Time Zone

The projection clock must not be in a setting mode.

Setting Second Time Zone

• Briefly push the button "MODE" (13) repeatedly until the display on the
right shows the indoor temperature.
• Hold down the "+" button (11) for about three seconds until the symbol
" " is displayed to the right of the time.
• To start setting, keep the button "MODE" (13) pushed for approx.
3 seconds. The hours of the second time zone flash.
• Set the second time zone with the buttons "+" (11) and "-" (12).
• Briefly push the button "MODE" (13) to leave setting mode.

Switching between Normal Time and Second Time Zone

• Hold down the "+" button (11) for about 3 seconds to switch between
normal time display and the second time zone.
• When the second time zone is selected, the symbol "
the right of the time.
g) Alarm Function
The projection clock has two different alarm times. For example, you can
set an alarm time for the week days and another one for the weekend
or holidays; you can also program two alarm times per day, e.g. at
07:00 AM and 09:00 AM.
Displaying the Alarm Time
Briefly press the button "MODE" (13) repeatedly to switch between the
following displays:
• Alarm time 1 (display "AL1")
• Alarm time 2 (display "AL2")
• Dual time (display "DT")
• Indoor temperature (display "°C" or "°F")
" will appear to
39