Explanation Of Symbols; Intended Use - Renkforce 1423363 Bedienungsanleitung

2. Explanation of symbols

The symbol with a lightning bolt in a triangle is used where there is a health
hazard, e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operat-
ing instructions that must be observed strictly.
The arrow symbol indicates special advice and operating information.

3. Intended use

The projection radio alarm clock is used to display the date and precise time as well as
the indoor and outdoor temperatures and a weather forecast.
The product also offers the following functions: Alarm function, alarm repetition, back-
lighting and projection of the time well visible in the dark onto the wall or ceiling.
The projection radio alarm clock with weather forecast based on the data of the last 24
hours for the next 12 - 24 hours. The data measured by an outdoor sensor are wirelessly
transferred to the projection radio alarm clock by radio. The time and date can be set
manually. The manufacturer assumes no responsibility for incorrect displays, meas-
ured values or weather forecasts and their consequences.
The voltage is supplied to the projection alarm clock via 3 AA/Mignon batteries (not
included). After pushing the Snooze button, the display will be lit for approx. 5 seconds
and the projection will be switched on. To keep the display illuminated permanently and
the projection on at all times, the enclosed plug-in mains adapter must be connected
as well.
The voltage is supplied to the outdoor sensor via 2 AA/Mignon batteries (not included).
Any other use than described above may cause damage to the product.
Read these operating instructions completely and attentively; they contain a lot of im-
portant information on configuration. Always observe the safety information!
37