C) Selecting 12H-/24H Mode; D) Displaying Week Day/Calendar Week; E) Selecting Language For Display Of The Weekday - Renkforce Smart USB Bedienungsanleitung

• Briefly push the "MODE" button (13). The date flashes. Set it with the
buttons "+" (11) and "-" (12).
• Briefly push the "MODE" button (A). The hours of the time flash. Set
them with the buttons "+" (11) and "-" (12).
• Briefly push the "MODE" button (A). The minutes of the time flash. Set
them with the buttons "+" (11) and "-" (12).
When setting minutes, the seconds are also automatically set
to "00" every time a button is pushed.
• Briefly push the button "MODE" (13) to leave setting mode.

c) Selecting 12h-/24h Mode

The projection clock must not be in a setting mode.
Briefly push the button "+" (11)" to switch between 12h and 24h time display.
In 12h mode, "PM" is displayed to the left of the time in the second half
of the day.

d) Displaying Week Day/Calendar Week

The projection clock must not be in a setting mode.
Briefly push the "-" (12) button to switch between weekday and
calendar week display.

e) Selecting Language for Display of the Weekday

The projection clock must not be in a setting mode.
For this, keep the "-" (12) button pushed. The display shows the possible
languages for the weekday in sequence ("EN" = English, "GE" = German,
"FR" = French, "IT" = Italian, "SP" = Spanish).
When the desired language is displayed, release the "-" (12) button.
38