Herunterladen Inhalt Inhalt Diese Seite drucken

System Requirements; Recording With A Dv Connection Cable; Systemvoraussetzungen; Aufnahmen Über Dv-Kabel - Samsung VP-D5000i Bedienungsanleitung

Digitaler camcorder
Inhaltsverzeichnis

Werbung

ENGLISH
IEEE 1394 Data Transfer

System Requirements

CPU : Intel
(or compatible) Pentium III™ 450Mhz or faster.
®
Operating System : Windows
Main Memory : More than 64 MB RAM
IEEE1394 Add-On Card or Built In IEEE1394 Card
Recording with a DV Connection Cable (VP-D5000i only)
1. Set the device to CAMCORDER and
the power switch to TAPE PLAY
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of
the camcorder to the DV IN/OUT
port of the other DV device.
Make sure that DV IN appears
on the screen.
3. Press the PLAY button of the
CAMCORDER.
Picture is displayed on PC
screen.
4. Click on the REC button on PC screen with the mouse.
5. To stop recording, click the
Note
When using this camcorder as a recorder, the pictures that appear on
the monitor may seem uneven, however recorded pictures will not be
affected.
82
82
®
98SE, ME, XP, Mac OS (9.1~10.2)
FADE
S.SHOW
BLC
DELETE
REV
FWD
(STOP) button on the PC screen.
Datenübertragung mit
Schnittstelle IEEE 1394

Systemvoraussetzungen

CPU: Kompatibel mit Intel
®
Betriebssystem: Windows
®
Hauptspeicher: Mehr als 64 MB RAM
Integrierte IEEE 1394-Karte oder IEEE 1394-Zusatzkarte
Aufnahmen über DV-Kabel (nur VP-D5000i)
1. Aktivieren Sie den CAMCORDER-
2. Verbinden Sie den digitalen Ein-/
3. Drücken Sie die Taste
CORDER.
Das Bild wird auf dem PC-Bildschirm angezeigt.
4. Klicken Sie mit der Maus auf die Aufnahmetaste auf dem PC-
Bildschirm.
5. Um die Aufnahme zu beenden, klicken Sie auf dem PC-Bildschirm
auf die Stopptaste.
Hinweis
Wenn Sie mit dem Camcorder Bilder von einer anderen DV-Quelle
aufzeichnen, können auf dem Monitor Bildstörungen zu sehen sein;
die Aufzeichnung wird dadurch jedoch nicht beeinträchtigt.
DEUTSCH
Pentium III™, 450 MHz oder höher.
98SE, ME, XP, Mac OS (9.1-10.2)
Modus, und stellen Sie den
Betriebsmodusschalter auf TAPE
PLAY.
Ausgang (DV IN/OUT) des
Camcorders mit Hilfe eines DV-
Kabels (nicht im Lieferumfang
enthalten) mit dem digitalen Ein-/
Ausgang des anderen DV-Geräts.
Auf dem Monitor wird DV IN
angezeigt.
(PLAY/STILL) auf dem CAM-

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vp-d5000

Inhaltsverzeichnis