Technical Data - VOLTCRAFT VC-340 Bedienungsanleitung

Error
No zero position
of the display in
the DC-A range
possible
The device will not
react to pushing
buttons and will
emit two signals
Repairs other than those described above should only be carried
out by an authorised specialist. If you have any questions about
handling the meter, our technical support is available.

14. TECHNICAL DATA

Display ....................................... 6000 counts (characters)
Measuring rate ........................... approx. 2 measuring operations/second
Measuring method A/AC ............ TrueRMS (True root mean square)
Current probe opening ............... max. 22 mm (Ø)
Automatic deactivation .............. approx. 20 minutes, can be deactivated
Voltage supply ........................... 2x 1.5 V button cell batteries (LR44, A76, AG13,
Power consumption ................... 5 mA
Battery lifetime ........................... approx. 20 h
Working conditions .................... 0 °C to +30 °C (rel. hum. ≤80%)
...................................................
...................................................
Operating height ........................ max. 2000 m
Storage temperature .................. -20 °C to +60 °C (rel. hum. <80%), without batteries
Weight ....................................... approx. 140 g
Dimensions (LxWxH) ................. 147 x 60 x 31 (mm)
Measuring category ................... CAT III 600 V
Degree of contamination ........... 2
Possible cause
The batteries are flat.
The selected function
is not available.
357 or equal build)
+31 °C to +40 °C (rel. hum. ≤75%)
+41 °C to +50 °C (rel. hum. ≤45%)
Remedy
Check the status. Replace
the battery.
Select another measuring
function in which this button
function is available.
45